Commercial Security Camera Systems
What we install
- IP camera systems with PoE infrastructure — power and data over a single cable run
- Fixed, dome, bullet, PTZ, and multi-sensor cameras, selected for the actual coverage problem rather than a catalog default
- NVR and storage sized to the retention period you genuinely need
- Remote and mobile viewing — from a phone, tablet, or workstation, on site or off
- Low-light, infrared, and thermal where lighting is poor or coverage is exterior
- Weather-rated outdoor installations, including parking areas, yards, and loading docks
- License plate capture at gates and entrances where the application calls for it
- Network segmentation — keeping camera traffic off your business network
Coverage beats camera count
The most common mistake we see is buying more cameras instead of better placed ones. A dozen wide shots of a parking lot will tell you a person was there and nothing else — not who they were. Entry points, choke points, cash handling areas, loading docks, equipment and inventory areas, and gates deliver identification rather than just motion.
We walk the site, ask what you are actually trying to protect or prove, and design from there. Sometimes that means fewer cameras than you expected.
Storage and retention
Retention is the specification most often gotten wrong, and it is the one that matters when you actually need footage. Thirty days is a common target; some industries, insurers, and municipal contracts require specific periods. Camera count, resolution, frame rate, and compression all drive the storage requirement — we size it to your real need instead of guessing and leaving you to discover the gap after an incident.
Access Control Systems
Keys get copied, and they never tell you who came through a door at 2 a.m. Access control replaces that with credentials you can issue, revoke, schedule, and audit.
What we install
- Card, fob, and mobile credential systems
- Keypad and PIN entry, and biometric readers where warranted
- Electric strikes, maglocks, and door hardware integration
- Controllers, panels, and door position monitoring
- Access schedules and permission groups — who gets in, which doors, what hours
- Audit trails — a record of every entry, which matters for security incidents, HR matters, and insurance claims
- Intercom and video entry for controlled and multifamily entrances
- Gate and vehicle access — barrier arms, gate operators, and vehicle credentials
- Turnover control — revoking a departed employee’s credential takes seconds, versus rekeying a building
Fire alarm integration is a code requirement, not an option
Access-controlled doors on egress paths must release when the fire alarm activates. That interlock has to be designed, installed, and tested correctly — and it is a frequent point of failure when the access control vendor and the fire alarm contractor are two different companies who each assume the other handled it.
We do both. Our fire alarm work covers design, installation, inspection, service, and monitoring, so the interface between the two systems is our responsibility and gets tested as one system.
Service & System Takeovers
A significant share of this work is systems someone else installed and then walked away from: a camera system nobody can log into, an access control panel with no documentation, cameras that stopped recording months ago and nobody noticed.
We take over, document, repair, and expand existing systems — including equipment we did not install. Where a system is genuinely at end of life we will say so, and where it has service life left we will keep it running rather than sell you a replacement.
Facilities We Serve
Manufacturing and industrial plants, warehouses and distribution centers, retail centers and restaurants, offices and professional buildings, medical and healthcare facilities, multifamily and apartment properties, auto dealerships and service centers, and — as a registered NJ public works contractor with DPMC, SBE, and SDA credentials — schools, municipal buildings, and public agencies.
On new construction and fit-out projects, camera and access control infrastructure is roughed in alongside the electrical, which is dramatically cheaper than pulling cable through finished walls later. See also structured cabling and network infrastructure.
Frequently Asked Questions
Do you install the systems or just the cabling?
Both — design, installation, configuration, and ongoing service of complete camera and access control systems, not just pathways and cable.
Can you service a system another company installed?
Yes, and it is a large part of what we do.
Do you install burglar or intrusion alarm systems?
No. We focus on video surveillance and access control, along with fire alarm systems.
Can I view cameras from my phone?
Yes — modern systems support secure remote viewing from phones, tablets, and desktops, with user-level permissions so employees see only what they should.
How many cameras do I need?
Fewer than most people assume, if they are placed well. We assess the site and design around what you are actually trying to see.
What happens to access control during a power outage?
That is a design decision we make with you — fail-secure versus fail-safe per door, backup power, and fire alarm release behavior all have to be considered together, and the right answer differs by door and by code requirement.
Serving North Jersey
We install and service security cameras and access control in Fairfield, West Caldwell, Montclair, Wayne, Livingston, Parsippany, Morristown, Paramus, Newark, Belleville, Bloomfield, Montville, Hackensack, and throughout North Jersey.
Request a Site Assessment
Call (201) 321-8949 or contact us online. We will walk the property, ask what you are trying to protect, and design a system that does it.
